Atmel Board

Model: MY-SAMA5-CB200-5D36
SMART SAMA5D3 MPU can provide processing capacity of up to 850DMIPS with power consumption of less than 150mW,which is the best choice for industrial application featuring high performance,low power consumption and sensitiveness to cost.

Send InquiryChat Now
Product Details

MY-SAMA5-CB200 view

Top view)

301.jpg

Rear view

302.jpg

SAMA5D3 MPU overview

SAMA5D3 MPU introduction

SMART SAMA5D3 MPU can provide processing capacity of up to 850DMIPS with power consumption of less than 150mW,which is the best choice for industrial application featuring high performance,low power consumption and sensitiveness to cost.its application includes controlling of panel,smart power facility and barcode scanner,e.g.any device which need high grade connection,enhanced user interface,high safety or to be powered by battery.SAMA5D3 is also the good choice for wearable computing application and mobile application.SAMA5D3 series include components of which support temperature range -40/+105°C and package of 12x12mm BGA324(space as 0.5mm)

SMART SAMA5D3 series can provide processing capacity of up to 50DMIPS at 536 Mhz,it is advanced in the market in terms of power consumption(less than 150mW in working mode,less than 0.2-5mW in low-power mode).it provides powerful and high performance external components and interfaces,including 3 USB ports in high speed,interfaces for GMbps and 10/100 ethernet,dual CAN and TFT LCD controller,camera,3 soft modulators of SDIO/SD/MMC、UART、SPI、TWI,12 bit ADC,32 bit timer and ect.Highly stable and reliable safety and Counterfeit prevention is offered by hardware encrypt engine( such as AES/3DES、TRNG、SHA) and safety leading.free Atmel Linux? distribution,Android distribution package,Qt SDK and a full set of C example for non-operating system users are attached with these components.SOM(module system),PMIC(power management IC),memory and kits from different software and hardware partners will make this item more completed.

SAMA5D3 advantage

· ARM Cortex-A5 kernel runs at 536MHz (850DMIPS) 

· floating point arithmetic unit is used for high precise calculation and fast data process

· superior low-consumption is leading in the market

· with all external devices activated,it can provide up to 536MHz working frequency with less than 150mW(in working mode)

· with SRAM and register,power consumption is as low as 0.5mW in low-consumption mode

· dual CAN control

· support IEEE1588 Gmbps ethernet MAC and 10/100 MAC

· 3 HS high speed USB ports(can be configured to 3 hosts or two host+one component port)

· CMOS image sensor interface

· graphic LCD controller,features Image synthesis and superimposition

· AES/3DES hardware encrypt engine and safty leading

· BGA324(15x15,invterval 0.8)package,and small package option BGA(12x12mm,interval 0.5)

· expanded industrial temperature range:-40°C to 105°C

SAMA5D3 diagram303.jpg

SAMA5D3 block diagram

304.jpg

SAMA5D3 MPU difference

305.jpg

SAMA5D36 critical parameter

ParameterValue
Pin Count:324
Max. Operating Freq. (MHz):536 MHz
CPU:Cortex-A5
Max I/O Pins:160
Ext Interrupts:160
USB Transceiver:3
USB Speed:Hi-Speed
USB Interface:Host, Device
SPI:6
TWI (I2C):3
UART:7
CAN:2
LIN:4
SSC:2
Ethernet:2
SD / eMMC:3
Graphic LCD:Yes
Camera Interface:Yes
ADC Channels:12
ADC Resolution (bits):12
ADC Speed (ksps):1000
Resistive Touch Screen:Yes
Crypto Engine:AES/DES/SHA/TRNG
SRAM (Kbytes):128
External Bus Interface:1
DRAM Memory:DDR2/LPDDR/LPDDR2
NAND Interface:Yes
Temp. Range (deg C):-40 to 105
I/O Supply Class:1.8/3.3
Operating Voltage (Vcc):1.08 to 1.32
FPU:Yes
Timers:6
Output Compare Channels:6
Input Capture Channels:6
PWM Channels:4
32kHz RTC:Yes
MPU / MMU:No / Yes
Quadrature Decoder Channels:0
Video Decoder:No

MY-IMX6-CB200 configuration  hardware configuration

CPUSAMA5D3xindustrial/expansion
memory256MBup to 512MB
storage256MBsupport up to 2GB
SPI Flash2Msupport programming
boot modeSPI bootensure the stability and reliability of products

working temperature range

Industrial grade: -40°C ~ 85°C

Industrial expansion grade: -40°C ~ 105°C

operation system support

kernel: Linux-3.18

interface:command line,

model command

name of model

MY-SAMA5-CB200-MPU specification-memory capacity-storage capacity

MPU specification

D36ACN, D36ACNR:industrial expansion

D36ACU, D36ACUR: industrial

memory capacity

256MB: 256G memory

storage capacity

256MB: 256G storage

example of model

MY-SAMA5-CB200-D36ACN-256M-256M 

MY-SAMA5-CB200 definition

No.PinDefault signalDefault InterfaceMultiplexMultiplexDefault InterfaceDefault signalPinNo.
1GND_POWER      GND_POWER2
3PC1ETX1EMACTIOB3LCDDAT19MCI2MCI2_DA0PC114
5PC8EMDCTCLK5LCDDAT18|TIOA1MCI2_DA1PC126
7PC3ERX1TIOA4LCDDAT21|PCK2MCI2_CKPC158
9PC6ERXERTIOA5LCDDAT17|TIOB1MCI2_DA2PC1310
11PC4ETXENTIOB4LCDDAT20MCI2_CDAPC1012
13PC7EREFCKTIOB5LCDDAT16|TCLK1MCI2_DA3PC1414
15PC0ETX0TIOA3 SSC0RK0PC1916
17PC2ERX0TCLK3 TF0PC1718
19PC5ECRSDVTCLK4 RF0PC2020
21PC9EMDIO  RD0PC2122
23PC30UTXD0UART0ISI_PCK TK0PC1624
25PC29URXD0ISI_D8|PWMFI2 TD0PC1826
27GND_POWER      GND_POWER28
29PC31  PWMFI1|FIQ LCDCLCDVSYNCPA2630
31PC23SPI1_MOSISPI1    LCDDISPPA2532
33PC25SPI1_NPCS0    GND_POWER34
35PC22SPI1_MISO  LCDCLCDHSYNCPA2736
37PC24SPI1_SPCK    GND_POWER38
39PC28SPI1_NPCS3ISI_D9|PWMFI0 LCDCLCDDENPA2940
41PA4LCDDAT4LCDC  LCDDAT2PA242
43PA10LCDDAT10  LCDDAT15PA1544
45PA14LCDDAT14 ISI_D1LCDDAT17PA1746
47PA12LCDDAT12  LCDDAT1PA148
49PA24LCDPWM  LCDDAT0PA050
51PA22LCDDAT22ISI_D6|PWMH1 LCDDAT3PA352
53PA28LCDPCK  LCDDAT8PA854
55PA20LCDDAT20ISI_D4|PWMH0 LCDDAT6PA656
57PA21LCDDAT21ISI_D5|PWML0ISI_D2|TWD2LCDDAT18PA1858
59PA23LCDDAT23ISI_D7|PWML1ISI_D0LCDDAT16PA1660
61PA5LCDDAT5 ISI_D3|TWCK2LCDDAT19PA1962
63PA7LCDDAT7  LCDDAT11PA1164
65PA30TWD0TWI0URXD1|ISI_VSYNC LCDDAT9PA966
67PA31TWCK0UTXD1|ISI_HSYNC LCDDAT13PA1368
69PD31  PCK1|AD11ISI_D10|SPI1_NPCS2TWI1TWCK1PC2770
71PD30PCK0SSC0:CLKAD10ISI_D11|SPI1_NPCS1TWD1PC2672
73PD29AD9AD  MCI0MCI0_DA3PD474
75PD28AD8  MCI0_DA1PD276
77PD27AD7  MCI0_CDAPD078
79PD26AD6  MCI0_CKPD980
81PD23AD3  MCI0_DA2PD382
83PD22AD2  MCI0_DA0PD184
85PD24AD4 PWML2|TIOB0MCI0_DA5PD686
87PD21AD1 PWML3MCI0_DA7PD888
89PD25AD5 SPI0_NPCS2|CTS0CAN0CANTX0PD1590
91PD20AD0 SPI0_NPCS1|SCK0CANRX0PD1492
93PD5PWMH2PWMMCI0_DA4|TIOA0 UART0TXD0PD1894
95PD7PWMH3MCI0_DA6|TCLK0  RXD0PD1796
97PD19 GPIOADTRG SPI0SPI0_MISOPD1098
99PB0GTX0GMACPWMH0 SPI0_SPCKPD12100
101PB7GRX3RK1 SPI0_MOSIPD11102
103PB13GRXERPWML3PWMH3|GRXDVGMAC:INTRP PB12104
105PB17GMDIO GCOLCAN0CANTX1PB15106
107PB11GRXCKRD1GCRSCANRX1PB14108
109PB18G125CK GTX7MCI1MCI1_DA2PB22110
111PB1GTX1PWML0GRX5MCI1_CKPB24112
113PB4GRX0PWMH1GTX5MCI1_DA0PB20114
115PB3GTX3TF1GTX6MCI1_DA1PB21116
117PB8GTXCKPWMH2GTX4MCI1_CDAPB19118
119PB9GTXENPWML2GRX4MCI1_DA3PB23120
121PB2GTX2TK1G125CKOUSART1RTS1PB27122
123PB6GRX2TD1 RXD1PB28124
125PB5GRX1PWML1 TXD1PB29126
127PB16GMDC GRX7CTS1PB26128
129PB25  SCK1|GRX6RF1|GTXEREMAC:INT_N PB10130
131BMS      DIBN132
133NRST      DIBP134
135TDI    DEBUGDTXDPB31136
137JTAGSEL    DRXDPB30138
139TCKSWCLK  SPI0_NPCS3|RTS0SSC0:IRQ PD16140
141TMSSWDIO     GND_POWER142
143TDO    USBADHSDPHHSDPA144
145NTRST     DHSDMHHSDMA146
147WKUP    USBB HHSDPB148
149SHDN      HHSDMB150
151D7 EBI:Dx  USBC HHSDMC152
153D6     HHSDPC154
155D5  LCDDAT23|TIOB2EBINCS2PE28156
157D4  LCDDAT22|TIOA2NCS1PE27158
159D3  USART2:CTS2A23PE23160
161D2  USART2:RXD2A25PE25162
163D1  USART2:TXD2NCS0PE26164
165D0   A20PE20166
167PE3A3EBI:AxGPIO:LEDUSART2:RTS2A24PE24168
169PE5A5 TCLK2NWR1/NBS1PE29170
171PE6A6 USART3:RXD3A18PE18172
173PE13A13 USART3:TXD3A19PE19174
175PE15A15SCK3PWML1|IRQMMC1:VDD_EN PE31176
177PE8A8 NWAITMMC1:CD PE30178
179PE10A10 GPIO:LEDEBI:AxA4PE4180
181PE14A14 GPIO:LEDA2PE2182
183PE16A16CTS3GPIO:LEDA1PE1184
185PE0A0/NBS0  A7PE7186
187PE11A11 RTS3A17PE17188
189GND_POWER    A9PE9190
191GND_POWER    A12PE12192
193GND_POWER      VCC_3V3194
195GND_POWER      VCC_3V3196
197GND_POWER      VCC_3V3198
199GND_POWER      VCC_3V3200

SAMA5D3 MPU introduction

SAMA5 main features

high performance
SAMA5 series is designed an an improvement for ARM Cortex-A5 in terms of insufficient power,its components can provide processing capacity up to 945DMIPS at power consumption less than 150mW

· *1.58 DMIPS/MHz ARM Cortex-A5 kernel

· the maximum working frequency(945DMIPS) is upt to 600 MHz

· 64bit internal bus architecture,32bit DDR controller which can offer band width of up to 1600 MB/s

· Neon and floating point calculation unit is used for highly precise calculation and fast data process

· capability of ARM Cortex-A5 FPU is 3 times higher than that of ARM Cortex-A8 FPU 

· L2 cache,is used to improve performance of the whole system

low power consumption

· SAMA5 components can lower effectively power consumption in all modes by applying innovative technology and fulfill following objectives:

· with all external devices activated,it can provide up to 536MHz working frequency with less than 150mW(in working mode)

· in low power consumption mode with SRAM and register kept,the power consumption is as low as 0.5mW and waking up takes only less than 0.5ms.in backup mode of RTC(real time clock),the power consumption is about 1.2μA 

· the best choice for the systems powered by battery

connectivity
SAMA5 components embed various kinds of high class communication external devices,so it is the best choice for network bridge and gateway

· support IEEE1588 ethernet MAC and Gbps ethernet MAC,dual CAN ports

· can be configured to 3 hosts or two host+3 high speed USB interfaces of one component port

· multiple SDIO/SD/MMC interface、UART、SPI、TWI、soft modulator、CMOS image sensor interface、ADC、32 timer and ect. please refer to "component overview" tab for more details.

enhanced user interface

· you can create upt to date user interface in fashionable,stable style with SAMA5 MPU.

· graphic LCD controller features synthesis and superimposition of image and integration( such as αblend,zoom,color transform and rotation) 

· 720p hardware video decoder is used to support playback of vedio in current main stream standard

· resistance touch screen interface

· CMOS image sensor interface

Safe
safety of SAMA5 series incudes functions of preventing copy,ensuring facticity and protecting application communication and data storage

satefy boot

· hardware encrypt engine,such as high class encrypt standard(AES)/triple data encription standard (DES)、RSA (Rivest-Shamir-Adleman) and ECC(elliptic curve crypto) and secure hash algorithm(SHA) and true Random number generator(TRNG)

· immediately encrypt code/decode through external DDR memory

· detect tamper of pin, to protect system from physical intruding

· cipher key and data safe storage

· ARM trusted area is for the partition among system,peripherals and internal resources to isolate the main software related to safety with environment operating system

safety
functions possessed by SAMA5 can meet easily with the safety standard such as IEC61508

· main crystal oscillator cock can work as a fault detector

· power on and reset

· independent watch dog timer

· writing protection of register

· memory management unit allow a setting of zone prorection in the memory

· ICM(monitor of integrity) based on SHA is used to verify integrity of content in memory

· Arm trusted zone

low cost of system

· SAMA5 realize the purpose of maximum flexibility and the the same time reducing demands for other expensive components by high integrity of system

· 0.8mm ball spacing package simplify PCB design and lower cost

· scheme for minimum low consumption need Chip discrete power and low cost

· 3 high speed USB ports help to save the cost for external integrator

· impedance control on memory circuit of DDR(dual data rate) save external resistors

· embedded RTC save external components

· solution with soft modulator integrated save cost for adding external modulator

SAMA5D3 Features

Core

· ARM Cortex-A5 Processor with ARM v7-A Thumb2? Instruction Set

· CPU Frequency up to 536 MHz 

· 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System Architecture (VMSA)

· Fully Integrated MMU and Floating Point Unit (VFPv4)

Memories

· One 160 Kbyte Internal ROM Single-cycle Access at System Speed, Embedded Boot Loader: Boot on 8-bit 

· NAND Flash, SDCard, eMMC, serial DataFlash?, selectable Order 

· One 128 Kbyte Internal SRAM, Single-cycle Access at System Speed

· High Bandwidth 32-bit Multi-port Dynamic RAM Controller supporting 512 Mbyte 8 bank DDR2/LPDDR/LPDDR2 with datapath scrambling

· Independent Static Memory Controller with datapath scrambling and SLC/MLC NAND Support with up to 24-bit Error Correcting Code (PMECC)

System running up to 166 MHz

· Reset Controller, Shut Down Controller, Periodic Interval Timer, Watchdog Timer and Real-time Clock

· Boot Mode Select Option, Remap Command

· Internal Low-power 32 kHz RC Oscillator and Fast 12 MHz RC Oscillator

· Selectable 32768 Hz Low-power Oscillator and 12 MHz Oscillator

· One 400 to 1000 MHz PLL for the System and one PLL at 480 MHz optimize d for USB High Speed

· 39 DMA Channels including two 8-channel 64-bit Central DMA Controllers

· 64-bit Advanced Interrupt Controller

· Three Programmable External Clock Signals

· Programmable Fuse Box with 256 fuse bits, 192 of them available for Customer

Low Power Management

· Shut Down Controller 

· Battery Backup Registers

· Clock Generator and Power Management Controller

· Very Slow Clock Operating Mode, Software Programmable Power Optimization Capabilities

Peripherals

· LCD TFT Controller with Overlay, Alpha-blending,Rotation, Scaling and Color Space Conversion

· ITU-R BT. 601/656 Image Sensor Interface

· Three HS/FS/LS USB Ports with On-Chip Transceivers

· One Device Controller 

· One Host Controller with Integrated Root Hub (3 Downstream Ports)

· One 10/100/1000 Mbps Gigabit Ethernet MAC Controller (GMAC) with IEEE1588 support

· One 10/100 Mbps Ethernet MAC Controller (EMAC)

· Two CAN Controllers with 8 Mailboxes, fully Compliant with CAN 2.0 Part A and 2.0 Part B

· Softmodem Interface

· Three High Speed Memory Card Hosts (eMMC 4.3 and SD 2.0)

· Two Master/Slave Serial Peripheral Interfaces

· Two Synchronous Serial Controllers

· Three Two-wire Interface up to 400 Kbit/s supporting I2C Protocol and SMBUS

· Four USARTs, two UARTs, one DBGU 

· Two Three-channel 32-bit Timer/Counters

· One 4-channel 16-bit PWM Controller

· One 12-channel 12-bit Analog-to-Digital Converter with Resistive Touch-Screen function

Safety

· Power-on Reset Cells

· Independent Watchdog

· Main Crystal Clock Failure Detection

· Write Protection Registers

· SHA: Supports Secure Hash Algorithm (SHA1, SHA224, SHA 256, SHA384, SHA512)

· Memory Management Unit

Security

· TRNG: True Random Number Generator 

· Encryption Engine

· AES: 256-bit, 192-bit, 128-bit Key Algorithm, Compliant with FIPS PUB 197 Specifications 

· TDES: Two-key or Three-key Algorithms, Co mpliant with FIPS PUB 46-3 Specifications

· Atmel? Secure Boot Solution

I/O

· Five 32-bit Parallel Input/Output Controllers

· 160 I/Os

· Input Change Interrupt Capability on Each I/O Line, Selectable Schmitt Trigger Input

· Individually Programmable Open-drain, Pull-up and Pull-down Resistor, Synchronous Output, Filtering

· Slew Rate Control on High Speed I/Os

· Impedance Control on DDR I/Os

Package

· 324-ball LFBGA, 15 x 15 x 1.4 mm, pitch 0.8 mm

· 324-ball TFBGA, 12 x 12 x 1.2 mm, pitch 0.5 mm



Hot Tags: atmel board, manufacturers, suppliers, factory, wholesale, customized
Related Products
Inquiry

Copyright © Zhuhai MYZR Technology Co.,Ltd All Rights Reserved.